How to Cut Metal With Your Oscillating Tool

An oscillating tool is a great invention of modern science. We can do a lot of works very easily and in a short time using this multi-tool. Before inventing this tool, cutting metal was a harsh job to do. But oscillating tool has made it so easy that it can be compared with cutting butter with a knife.

As like the other tasks, cutting metal is done very swiftly by an oscillating tool. You can cut any metal with the combination of this tool and a proper blade. You cannot expect the blade which cuts plastic can cut an iron. So if you want to get the best result, you need to have the right blade for the right job. In the following article, we are going to know about the right procedure of cutting metal with an oscillating tool.

Plunge cut oscillating saw blades

When you need to make a straight cut, you can use a plunge cut oscillating saw blade. This is the most common type of blade.

Sometimes you need to straight cut a pipe or bolt which is rusted. At that time, these blades can be very handy. This type of blade is so perfect to cut through any non-ferrous and sheet metals. The teeth of this blade are arranged straight which helps it to make the cut straight. This blades can be wide in size and it is helpful to stay straight.

Carbide tipped blades

Carbide tipped blades are so useful to cut metals. You can use this blade on your oscillating multi-tool to make nicer and precise cuts.

Another reason that makes this blade amazing is its’ durability. It can last longer than other metal cutting blades. They can last 10 times longer than the other blades.  This carbon tipped blades are very affordable in price. In the past few years, the price has gone down a lot.  Due to the long lasting feature and low price, this blade has become so popular in a very short time.

Semi-Circular Oscillating Tool Metal Cutting Blades

Semi-circular oscillating tool blades are generally used to cut hard metals. It is also famous for making long and linear cuts.

You can make a long, linear, plunge and flash cut with a semi-circular blade. They can be available in many sizes.  You can get an amazing result from the blade if you use it for cutting around corners. The blade is also good for cutting square.

Safety measure

When you are using a metal cutting blade, you need to use it very carefully. Always keep the blades in a safe plastic container. If you don’t use this carefully, it can cut your skin.

Never use a dull blade. A dull blade can be sharped and get back to its’ original position. Using a dull blade can damage the cutting material.

Always use glasses while cutting the metal. Tiny metal pieces can get into your eyes and can damage your eyes. After cutting with the blade, the blades get so much hot. Don’t touch the blades after cutting.

Operational tips

The oscillating tool comes with a speed control mechanism. When you are about to cut metal, start the cut slowly. Gradually increase speed.

When you are cutting a rusted nut, just cut ¾ of the nut and then remove the blade from there. Break the rest of the nut using pliers. The reason you don’t cut the whole nut is, the nuts can just jump upside or down and can make any kind of damage. It can happen because of the very high speed of the blade.

Hold the tool strongly. The tools can slip from your hand because of the vibration it makes during operation.

Conclusion

An oscillating multi-tool can be very handy and useful when you cut any kind of metal. Cutting metal was never so easy before the oscillating tool was invented. I hope you will follow the tips I described above and you will get the most from this multi-tool.